Northfield house fire 8-28-11

Updated at 10:00 AM

Late Sunday night, residents in Northfield reported smoke in the 300 block of Eaton Street. Firefighters arrived on the scene and found heavy smoke coming from an unknown source across the entire block. As they walked the area, the engine crew moved to the next block and discovered thick smoke pouring from a one-story brick ranch-style home at 344 Wagner Road.
Winnetka firefighters ventilate the roof as firefighters from Glencoe enter the house on Wagner Road with a second line. Tim Olk photo

Smoke dissipates as interior companies hit the fire and ventilation is complete. Tim Olk photo

As Glencoe firefighters enter the house, Northfield firefighters search the garage where they found the lights on a vehicle were illuminated. Tim Olk photo
The fire was quickly upgraded to a Code 4 working fire, and Northfield crews sprang into action. Mutual aid units from Winnetka, Northbrook, Glenview, Glencoe, and Wilmette responded promptly. The fire was brought under control relatively fast, but the homeâ€™s occupants were not present at the time. Tragically, the family dog did not survive the incident.
Northfield Squad 29 was the first unit on the scene. Firefighters can be seen on the roof after completing vertical ventilation. Larry Shapiro photo

Squad 29 had a primary and backup line going into the house. Larry Shapiro photo

Glencoe Squad 30 provided supplemental lighting in front of the house. Larry Shapiro photo

A Glencoe firefighter prepares to remove his personal protective equipment (PPE) after exiting the house. Larry Shapiro photo

Almost no damage was visible from the street. Firefighters cut a hole in the roof and broke several windows to ventilate the house while fighting the fire. Larry Shapiro photo

Glenview Engine 13 was one of the Code 4 companies. Larry Shapiro photo

After additional staffing was available, firefighters brought Engine 29 to the scene. Larry Shapiro photo
Larry Shapiro and Tim Olk were on the scene capturing the events as they unfolded. Despite the quick response, the fire caused significant internal damage, though the exterior of the home appeared largely intact. Local residents are being advised to remain cautious and report any unusual smells or signs of smoke.
Drying Machine
Injection molding is suitable for almost all thermoplastics. In recent years, injection molding has also been successfully used to form some thermosetting plastics. The molding cycle of injection molding is short (a few seconds to a few minutes), the quality of the molding products can be from a few grams to dozens of kilograms, can be a molding of complex shape, precise size, with metal or non-metal inserts molding products.
Industrial Dryer Machine,Pressure hopper Dryer ,auxiliary pressure Dryer machine
Ningbo Haijing Plastic Machine Manufacturing Co. LTD , https://www.chinahaijing.com