Hantai Tire, a tire manufacturer, recently announced that its European technology R&D center expansion project was successfully completed and an unveiling ceremony for a new facility was officially held in Hanover, Germany. “The continuous increase in R&D projects for OE tire replacement and replacement tires in Europe and the South Korea requires a corresponding expansion of its research and development capabilities. The use of Hannover’s new facilities is a decisive step in the long-term expansion strategy of the European R&D center, and not only the number of R&D specialists Growth, but also expanded by 70% of the test and office space.†Stefan Fischer, head of Hantek Tire's European Technology R&D Center, said, “Just recently Hankook Tire's European Hungarian plant started the expansion project again to further increase production efficiency. The continuous expansion of research and development capabilities and production capabilities will greatly promote the sustainable development of Hankook Tire's European market in the future. Founded in Hanover in 1997, Hankook Tire's European Technology R&D Center is dedicated to the development of localized products suitable for Europe's unique climate and driving conditions. Its focus is on passenger cars, SUVs, and light truck OE tires, providing European automotive manufacturers with Strictly demanding customized tire solutions. Based on outstanding product quality, Hankook Tire has established a close partnership with more and more top automotive manufacturers in Europe such as Audi, BMW, Ford and Volkswagen. After 15 years of steady development, the R&D center has grown from the initial 5 employees to today's 45 engineers and tire experts. It is reported that in the fall of 2011, Hankook Tire, which has just completed the second phase of the expansion, is located in the Hungarian factory in Europe. It has started a new expansion project again on October 1 this year and is expected to be completed in the second half of 2013. The expansion project has invested a total of 8.6 million euros and will be equipped with the most advanced mixing production equipment, which will greatly increase production efficiency. Air source heat pump
Water circuit electric heater
Air Source Heat Pump,Hot Water Air Source Heat Pump,Heating Air Source Heat Pump,Scroll Air Source Heat Pump Jinan Amrta Air Conditioning Co.,Ltd , https://www.amrtaac.com
Cooling capacity: 20kW-50kW
Characteristics:
1.Structure. Panels and base frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.
2.Compressor. Hermetic scroll type compressor, equipped with the crankcase heater and thermal protection with thermal overload cut-out and crankcase heater mounted on rubber vibration isolators.
3.Axial fan. External rotor type axial fans, equipped with single phase direct drive motors, low noise 6 poles, protection level IP54, provided with a protective outlet grille.
4.Evaporator. High efficiency and low pressure drop stainless steel (AISI 316) water exchangers, with anti-freeze heating element (option) and differential pressure switch, factory insulated with flexible close cell material.
5.Condenser. Coils are consisting of seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins, 100% fully quality tested; sub cooling circuit to prevent freezing at the base (optional); protected with metal grill.
6.Desuperheater: High efficiency stainless steel brazed plate heat exchanger, factory insulated with flexible close cell material (optional).
7.Refrigerant circuit. Copper tube connection with charge valve, filter, sight glass, gas-liquid separator, thermostatic expansion valve, low pressure switch with automatic reset, high pressure switch with manual reset. The heat pump unit is completed also with 4-way valve, liquid receiver and one way valve.
8.Water circuit. Built with air vent valve, water drain connection, and female-threaded hydraulic connectors. Water pump (8kW-30kW), differential pressure switch. Expansion tank (8kW-30kW)
9.Electric panel. Consists of:
Compressor contactor
Compressor protection breaker
Fan motor protection breaker
Control circuit protection breaker
Phase sequence relay (only for 3-phase)
Programmable microprocessor controller
10.Optional
Additional electric heater embedded in the coils for defrosting in low temperature ambient. It must be factory installed
Stainless steel covering
Remote condenser
Tube in tube heat exchanger
