So, you’ve finally received the big box containing your brand-new Delfast Top 3.0 electric bike! Congrats! I know the wait felt endless, but trust me, it was worth every second. And here it is—your dream e-bike sitting right in front of you, all boxed up and ready to roll. Exciting, isn’t it?

Before you hit the road (or trails), though, there are just a few simple steps to set everything up. Don’t worry—it’s not rocket science at all. Here’s a quick rundown of what you need to do:

• Take the bike and all its components out of the box.
• Install the battery, making sure it’s connected properly and secure.
• Check and adjust the tire pressure to the recommended levels.
• Mount the front wheel securely.
• Attach the front light and mirrors for visibility and safety.

To help you along, we’ve created a handy unboxing video that walks you step-by-step through the entire process. If you prefer text-based instructions, they're available below too. With a bit of effort, you'll be cruising on your Delfast Top 3.0 in no time!

Step 1: Unboxing and Initial Setup

Start by opening the shipping box carefully. Pull out everything inside, including the main bike frame, the battery, and any other accessories. Make sure you don’t miss anything important.

Step 2: Installing the Battery

Next, grab your screwdriver and remove the cover on the left side of the bike. Beneath it lies the battery cavity. Open it up and insert the battery following the instructions provided in the manual. Be cautious—it’s quite heavy! Once installed, double-check the connections and replace the cover securely.

Remember, always use the official Delfast charger to charge the battery for the first time. Using another charger could damage the battery permanently. Fully charge the battery before your first ride.

Step 3: Tire Pressure Check

Verify the tire pressure using a gauge. Refer to the manual for the recommended PSI levels. Properly inflated tires ensure a smoother ride and better performance.

Step 4: Attaching the Front Wheel

Loosen the clamps and axle nuts holding the front wheel in place. Slide the wheel into position and thread the axle through the hub. Secure both ends with the clamps and tighten the nuts firmly.

Step 5: Front Light and Mirrors

Attach the front light to the front of the bike and secure it with the provided screws. Similarly, install the mirrors on either side of the handlebars. They should snap into place easily.

Final Touches and First Ride

Adjust the seat height to your comfort level and apply any decals to the battery cover. Double-check everything is assembled correctly, then give it a test run. Turn it on, and you’re good to go!

Riding your Delfast Top 3.0 is going to be an amazing experience. Whether you’re commuting or exploring off-road paths, this e-bike is built to deliver smooth and efficient rides. Have fun, stay safe, and enjoy every moment on your new companion!