2. Development and production examples China's wollastonite mines are generally mined and mined, and sold after simple selection. In recent years, the selection of wollastonite ore has been conducted. At present, the study of wollastonite beneficiation process is divided into four types of process, namely calcareous ore, calcium-silice ore, siliceous, depending on the genetic type, ore structure, structure and mineral composition of the deposit. ore and iron ore quality. The ore dressing method is mainly carried out along two technical schemes: flotation process is mainly used for calcium, calcium-silice and siliceous ore, and magnetic separation or flotation-magnetic separation combined process is adopted for iron ore. The following are examples for different processes. 
1 Wollastonite flotation process Research ore: Jilin Changzizi wollastonite mine.
Ore properties: The main mineral composition in the ore is shown in Table 3. The wollastonite ore is dense, and has a clump-like, strip-like structure and a crystal-morphing structure. The main mineral is wollastonite, which is his or semi-self-granular, needle-like and slightly fibrous. The particle size is generally 0.01 to 0.3 mm. A small amount of wollastonite is distributed in a fine aggregate state together with diopside or tremolite . The chemical analysis of the ore is shown in Table 4.

Beneficiation method and process flow: According to the situation that the iron content in the wollastonite ore is low and the gangue mineral is mainly calcite , the wollastonite and calcite are sorted by a single flotation process. The dosage of flotation reagents is shown in Table 5. The test results are shown in Table 6.

2 Wollastonite magnetic separation process research Hubei Fengjiashan wollastonite mine iron content of 4.57%, belonging to iron wollastonite ore, using two strong magnetic separation process, de-ironing rate of 80.13%, Fe 2 O 3 drop To 0.9%, the product meets the requirements of the ceramic industry, and the analysis of wollastonite concentrate products is shown in Table 7.

 Introduction:

The tester can help diagnose injector problems, you can use it to test each injector individually to help
identify stuck, leaking or burnt-out conditions. It uses 12V vehicle battery for power. It has 4 pulse modes, the continuous mode (mode 4) helps identify good or bad injector. The mode lock feature ensures test condition uniformity. It can work with any fuel pressure tester.

 

Features:

The features of each OBD code reader depends on the make and model.

However, it is common for most readers to have:

LCD screen readouts

View diagnostic trouble codes (DTC's)

Ability to reset / clear DTC codes

Get "snapshot" data so you can view what was going on when the code was triggered

 

Higher-end OBD code readers can have more advanced features such as:

Languages other than English

Code definitions right on the unit

Display freeze frame data

 

Specification:

Operation temperature range: 0 ~ 40 C

Frequency response: 40KHz + 2KHz

Power supply: 9V 6F22 battery, the maximum working current is about 35mA

Battery low voltage alarm: power indicator lights out when power supply is insufficient

 

 

Pricing:

OBD-II code readers vary in price.

They range from an affordable price ($85) to many hundreds of dollars, or more.

 

Photos:

 

 

More Information:

If you're interested in getting more information on OBD-II code readers or are interested in purchasing one,

check out complete list of Frequently Asked OBD Questions, and also the ads throughout this site.

Some brand names of OBD readers are Carsara, Cartrend, Actron, Innova, etc.

 

Reference Links:

 

Injector Tester

Injector Tester,Fuel Injector Tester,Diesel Injector Tester,Fuel Injector Pulse Tester

Shenzhen Cartrend Technology Co, Ltd , https://www.cartrendthings.com