BETA-Alanine,BETA-Alanine CAS NO 107-95-9,CAS NO 107-95-9 BETA-Alanine Ronas Chemicals Ind. Co.,Ltd. , https://www.ronaschemical-cn.com
**Product Information:**
- **Model Number:** HS-CS-017
- **Trade Methods:** FOB
- **Number of Employees:** 120
- **Company Location:** Ningbo, China
- **Specification:** SGS Certified
- **HS Code:** 84314990
- **Certificate:** ISO9001, TS16949
- **Delivery Time:** 30 Days
- **Payment Methods:** L/C, T/T
- **Trademark:** HS
- **Origin:** Ningbo, China
---
**Product Name:**
Hinge Products
Hinge Terminology
Military Hinges
Weld-On Hinges
Spring Hinges
Latch Hinges
Spring Release Hinges
Butt Hinges
Plastic Hinges
Stainless Steel Strap & Tee Hinges
Specialty Hinges
**Continuous Hinges:**
- Aluminum Continuous Hinges
- Stainless Steel Continuous Hinges
- Un-plated Steel Continuous Hinges
- Pre-plated Continuous Hinges
- Stainless Steel with Bright Anneal Finish
**Machining Parts:**
Brass Machining Parts, Precision Machining Parts, CNC Parts, CNC Machined Parts, CNC Precision Parts, CNC Precision Components, Aluminum Parts, Stainless Steel Parts, Metal Parts, Precision CNC Parts, Casting Auto Parts, Casted Auto Parts, Auto Brake Discs, Exhaust Manifolds, Cylinder Caps, Sand Casting Parts, Machining Parts
**Place of Origin:** Ningbo, China
**Lead Time:** 20–30 Days
**FOB Port:** Ningbo
**Features:**
**Specifications:**
- MS-20257 specification, supersedes AN-257
- A) Complete hinges are furnished with a pin of the same length.
- B) The second dash number indicates length (L), expressed in inches and hundredths, not exceeding the stock length of the table. End loops and/or tangs must never exceed a full loop or tang, and both ends must be equal within 0.020 inch.
- C) Tolerance shall be ±0.008 on each dimension for F, 2F, 3F, etc., and shall not be cumulative.
- D) Types X and Y half hinges can be made from Type H half hinge but will not be stocked or procured by service activities.
- E) Hinge pins shall be in accordance with MS20253. Use cadmium-plated corrosion-resistant steel pins and aluminum alloy hinges. Use passivated corrosion-resistant steel pins with corrosion-resistant steel hinges.
**Material:**
Aluminum Alloy 5052, H24 or H34 per QQ-A-250/8. Corrosion-resistant steel per QQ-S-766, Type 301, 302, or 304.
**Finish:**
Aluminum Alloy: Anodized, MIL-A-8625T, Type II or none depending on coding. Corrosion-resistant steel: None.
**Additional Notes:**
Remove all burrs and sharp edges. Dimensions in inches unless otherwise specified. Tolerances: Decimals ±0.010, Angles ±½ degree. Add H, X, or Y before the first dash number for a half hinge without a pin.
**Width:**
The overall dimension of a hinge from edge to edge, opened to a flat position, across the knuckle. Leaf width is measured from the center of the pin to the outer edge of the leaf.
**Width Restrictions:**
When determining the maximum width of a given leaf in a hinge, the maximum hinge width must be divided by 2.
**Length:**
The dimension of a hinge measured along the pin.
Northeast offers the expertise and solutions you need to get the job done right—on time and within budget. We can quickly respond and accommodate demanding schedules and delivery requirements.
Weld-on hinges and barrel weld-on hinges have many applications. We stock various sizes in steel, stainless, and aluminum. Optional grease fittings help prevent corrosion. Weld-on hinges offer less side play and much better axial alignment than traditional hinges.
Weld-on hinges are designed with special leaves for welding installation. All come with a bushing between the two leaves. These hinges can also be customized to meet your specific requirements.