Stripe Metallic Fabric In Knit Stripe Knitted Fabric,Metallic Fabric In Knit,Knitted Stripe Metallic Fabric,Stripe Metallic Fabric In Knit Shaoxing Jiuyang Textile co.,ltd , https://www.textilejy.com
1. Regular inspection of mechanical parts shall be carried out once a month. Check whether the bolts, bearings and other active parts of the worm gears, worm gears, and bearings are rotated flexibly and in a worn condition. The defects shall be promptly repaired and shall not be used recklessly.
2. The machine should be used in a dry and clean room. It must not be used in places where the atmosphere contains acids and other gases that are corrosive to the body.
3. When the machine is used or when it is stopped, take out the rotating drum to clean and brush the remaining powder in the bucket, and then install it to prepare for the next use.
4. When the roller is shaken before and after work, please adjust the M10 screw on the front bearing to the appropriate position. If the gear shaft is shaken, please adjust the M10 screw on the rear of the bearing frame to the proper position, adjust the clearance so that the bearing will not produce noise, hand turn the pulley, suitable for tightness, too tight or too loose can damage the machine. .
5, if the decommissioning time is longer, the machine must be wiped clean, the machine's smooth surface coated with anti-rust oil, covered with a cloth. Hot Recommendation: screw packaging machine {recommended} food pillow packaging machine {recommended} metal detection machine {recommended} automatic vertical packaging machine {recommendation} pharmaceutical horizontal packaging machine {recommendation} grain quantitative packaging machine {recommendation} screw quantitative packaging Machine {recommended} meat food vacuum packaging machine {recommended}