Cassidy Sprinkler Leisuwash specializing in manufacture Automatic Car Wash Machine, Touchless Car Wash , Automatic Touchless Car Wash, touchless car wash equipment, robot car wash, smart car wash system, leisuwash 360, leisuwash leibao 360, laserwash 360, leisuwash touchless car wash machine, leisu wash touchless car wash automatic, leisu wash 360 high pressure touchless car wash equipment, robo car wash, touch free car wash, leisuwash 360 touch free car wash, leisuwash 360 price, automatic car wash price, leisuwash in malaysia, no touch automatic car wash machine, leisuwash 360 mini, leisuwash SG fully automatic car wash equipment. Automatic Car Wash Machine,Leisuwash S90 Standard,Automatic Leisuwash S90 Standard Car Wash Machine,Leisuwash S90 Standard Car Wash Machine Hangzhou Leisu Cleaning Equipment Co.,Ltd , https://www.leisuwashtouchless.com
Introduction
Basic parameters
User operation guide
Sprinkler Structure and Description
Leisuwash S90 touchless car wash machine high intelligent high quality, with car wash + car care + drying process totally, each car wash takes time 1 minute to 5 minutes which depends on the car wash mode.
Leisuwash S90 Car Wash Machine is an entry level car wash unit, but you won`t find any low grade components and no cost cutting on the expense of quality. Each Leisuwash S90 is built by Leisuwash employees in accordance with our usual quality standards, the low price is achieved by high standardization and the use of proven technology. The Leisuwash S90 is for clients that need a wash machine at a competitive price with higher ROI.
China Automotive Networking Sprinklers Catalog A total of China's Ministry of Industry and Information Technology Inc. Sprinkler Trucks Automobile Bulletin All 10 Categories 253 Manufacturers 227 Sprinkler Brands 3071 Sprinklers Product Information, Latest Sprinklers Announcement, Environmental Notices, Fuel Bulletins, Free Announcements, pictures, news, and price information on the most timely sprinkler quotes. Dongzheng Dongfeng bully sprinkler
Dongfeng Xiaobawang Sprinkler: It is also called a green spray truck and water tanker. It consists of a car chassis, an inlet and outlet system, and a tank body. According to different use environments and purposes, there are a variety of spray and water transport functions. The multifunctional sprinkler integrates multiple functions into one. Standard configuration sprinkler (greening sprayer, water tanker): front shower, side spray; high side shower; rear working platform with green sprinkler, can be adjusted into a column, with a range of ≥ 28m; can also be adjusted to fog Shape, range ≥15m. Can be equipped with medicine discs and fight drugs. It can also install advanced equipments such as medicine discs, medicine pumps, anti-corrosion and anti-rust in tanks, multi-directional inlet and outlet water connections, solenoid valves, pneumatic valves and so on.
The type of bully:
Wheelbase 3300 and 3000. Engines 4100 to 4102, Yunnei engines, Zaochai engines and Yangchai engines. The difference in price, Chaochao is the most expensive, and Yangchai is the cheapest, with an intermediate gap of 10,000.
Dedicated performance:
1. The basic composition of the sprinkler: rust-proof tank, communicating device, special self-priming sprinkler, pipe network, spray outlet, working platform, and second-class chassis.
2. The sprinkler tank body is made of high-quality carbon steel sheet of Wuhan Iron and Steel Co., Ltd., and a large-scale coiling machine is used for molding once, and the advanced arc butt welding process is adopted at the joint of the head and the tank body.
3, sprinkler standard configuration: before the spill after the sprinkler, side spray; high side shower; rear working platform, with green sprinkler cannon, can be adjusted into a column, a range of ≥ 28m; can also be adjusted into a fog, a range of ≥ 15m, Vertical suction 7m.
4, sprinkler optional configuration: disc, pump, anti-corrosion rust inside the tank, multi-directional inlet and outlet connections, solenoid valves, pneumatic valves.
Product Name: Dongzheng Dongfeng bully sprinkler
Gross mass (Kg): 5495
Dimensions (mm): 5650×1900×2300
Rated weight (Kg): 2500
Carriage size (mm): 3000×1500×820
Service quality (Kg): 2865
Approach/Departure (° ): 17/13
Emission Standards: National/European Standards
Peak speed (km/h): 90
Others: Effective volume of the tank: 3.1 cubic meters, 3.1 tons of water
Engine parameters
Engine Type YC4F90-30
Engine production company Guangxi Yuchai Machinery Co., Ltd.
Displacement (ml) 2659
Power (kw) 66
Chassis parameters
Chassis type: EQ1050TJ20D2
Fuel Type: Diesel
Wheelbase: 3000
Axial load: 2220/3275
Tire specifications: 7.00-16, 6.50-16
Starting from September 1, 2010, Guangzhou's Pearl River Delta region will implement the National IV emission standard. At that time, the country's three-emission motor vehicles will not be able to license in the region, and many national first-tier cities will continue to implement the three national emission standards. The three national emission standard engines are divided into three types. One is the high pressure common rail technology, which is often referred to as the EFI engine. The second is the single pump, that is, the oil pump oil supply engine. The third is EGR. A secondary exhaust engine is equipped with a tail gas recycling technology that has reduced vehicle exhaust emissions.
1. Requirements for water When the sprinkler uses the river ditch or pond as a source of water, pay attention to that all the ends of the suction pipe are not in the water. In order to avoid inhaling stones or more sand and drift debris, the suction pipe end is generally provided with a filtering device, and it is forbidden to remove the filtering device during the water absorption. If the water source is shallow, it is necessary to dig up the water absorption area in advance so as to ensure that it does not contain impurities and air. Different sprinkler pumps have different requirements for water sources. Clean water pumps require no impurities in the water. Turbid water pumps require no stones and excessive sediment in the water.
2. Add water diversion Every time the centrifugal pump absorbs water, a certain amount of water must be added to the pump. After the addition, the water inlet must be closed. When the self-priming pump is used for the first time, it is necessary to add water, and it is unnecessary to add water afterwards.
3. The inlet pipe must be vacuumed The water inlet system must maintain a certain degree of vacuum before it can suck water into the tank. The inlet pipe system must be sealed reliably, the hose can not be damaged, the hard pipe can not have cracks, otherwise it will have a phenomenon of air leakage, which will result in the situation that it cannot suck water.
4. Parking stalls Before the water sprinkling vehicle or water sprinkling, the power take-off device must be parked.
5. Winter water release Before the advent of winter, the water in the pumps and pipes should be vented to prevent freezing. The northern part of the country is generally no longer under construction during the severe winter. Therefore, after the construction is completed, the water in the pump and the water pipe will be drained immediately to prevent future problems.
6. Watering precautions The front sprinkler of the sprinkler is located at a low position, close to the ground, the spray pressure is relatively large, and can be used for flushing the road surface; the position of the rear sprinkler is relatively high (the sprinkler is generally installed on the left and right sides of the sprinkler), and the sprinkler surface is wide, and can be used for highway construction and watering. When the rear nozzle is used, the front nozzle should be closed; when using the adjustable nozzle, the width of the sprinkler can be adjusted as needed. The wider the sprinkler width, the less the amount of intermediate overlap and the more uniform the sprinkler density.
7. Lubrication and fastening During the process of use, lubrication points of the transmission assembly should be regularly lubricated, and the joints should be tightened frequently to ensure normal use.
8. Regular sewage The water tank of the sprinkler truck is provided with a sewage pipe. The inlet of the pipe is the lowest point of the water tank. After a period of use, the discharge pipe switch should be opened periodically to remove the accumulated debris from the tank until the water becomes clear.
The basic composition of the Dongfeng sprinkler: rust-proof tanks, connected devices, dedicated self-priming sprinkler pumps, pipe network, spray outlets, work platforms, two types of chassis.
Sprinkler optional configuration: GPS, universal sprinkler, electromagnetic valve, pneumatic valve, visual operating system, external power, disc.
First, the chassis The chassis of special vehicles generally uses Dongfeng, Jiefang, Futian Auman and other types of chassis. Currently widely used are "Dongfeng Duba sprinkler, Dongfeng Duolika sprinkler, Dongfeng 140 sprinkler (long head), Dongfeng 145 sprinkler (flat head), Dongfeng 153 sprinkler (flat head), Dongfengtian Jin sprinkler, Dongfeng Tianlong DFL1250A8 sprinkler (after the double bridge).
Second, the tank production Automatic production line tank production process is divided into: cutting, automatic welding puzzle, head spin forming, tank rolling and other domestic advanced production technology. Tank materials are mostly made of high-quality carbon steel plates. In special applications, 304 stainless steel can also be used according to the customer's needs. The volume of the tank body is "4 cubic, 5 cubic, 6 cubic, 8 cubic, 10 cubic, 13 cubic, 15 cubic" and so on.
Third, the pipeline system: By "pipes, valves, filter devices, outlets (pre-spray after sprinkler, side spray; high-side shower; rear working platform with green sprinkler antiaircraft guns).
Fourth, the operating system The transmission is driven mainly by the engine. The power take-off mounted on the transmission drives the sprinkling pump. The sprinkling pump generates power and sprays the liquid inside the tank through the pipe network. Working range: Self-priming height: ≤7m, Sprinkling width: ≥14m, Maximum range: ≥28m; Can be adjusted into a column with a range of ≥28m; It can also be adjusted to a mist with a range of ≥5m.
Five, sprinkler Equipped with sprinkler, green sprayer high-power special sprinkler (Weilong pump), with fire joints, with self-flow valve, with self-priming function.
Optional equipment: It can be equipped with sprinkling discs, drug pumps, anti-corrosion rust inside the tank, multi-directional inlet and outlet connections, solenoid valves, pneumatic valves and other advanced facilities to meet the needs of different users.
Six, water sprayer The Dongfeng sprinkler is equipped with a duck-billed or round-headed nozzle in front of it, followed by a cylindrical sprinkler nozzle or a shower head nozzle, and a working platform at the rear, equipped with a water cannon. There are 8 nozzles on the back.
Sprinkler, green spray vehicle special features: Green sanitation function, suitable for urban sanitation and environmental sanitation, the use of quality leading high-power dedicated sprinkler pumps. After the rush (spray), sprinkle, with side spray (shower), with the back of the platform, install green sprinkler on the platform (cannon with heavy rain, moderate rain, drizzle, fog can be adjusted), with suction pipe, with fire Joints, with self-flow valve, self-priming self-discharge, optional 20 meters green spray reel, high-altitude operations, truck crane cargo and other functions.
Seven, cab: Sprinkler cab is divided into: pointed cab, or flat cab, also known as long cab, short cab.
Sprinkler power box description
Sprinklers currently use Dongfeng, the liberation of series power take-off, pneumatic operation, operation switch pull back, take the force of the teeth into the mesh position, drive the pump through the drive shaft, the switch back to the position, the pump stops working.
Sprinkler sprinkler function description:
The sprinkler is equipped with a duck-shaped nozzle or a round-headed punching nozzle, a cylindrical open-spray nozzle or a showerhead nozzle at the back, and a working platform at the rear, equipped with a water cannon. 8 nozzles at the rear (optional)
The water sprayer is generally used for flushing the street and plays a role of dust removal and cooling. The water sprayer can change the spraying direction and angle of the water sprayer by adjusting the nozzle thread. The water spray gun can be used for urban and rural landscape greening and emergency firefighting. Lian Peng mouth can be poured down the middle of the road to the dust from the sprinkler, play a role in cleaning the air.